Manually installing multiple MySQL instances on Linux: HOWTO

Installing a single MySQL instance on a linux machine is a very simple operation. It may be as simple as:

apt-get install mysql-server

But you cannot use this method to install another MySQL instance. Moreover, if you try to manually install another instance, you may find that some collisions occur.

For example, when trying to install two 5.0 servers, apt-get or yum will just tell me “package is already installed”.

When trying to install a new 5.1 server along with 5.0, an implicit upgrade is performed.

But even if we try forcing the installation, there are collisions:

  • A dpkg or rpm will install my.cnf under /etc. Two installations will override one another. With RPM you may get a .rpmsave backup file, but that doesn’t help too much.
  • The daemon file: /etc/init.d/mysql(d) is overwritten.
  • The default data directory is used for both installations: /var/lib/mysql
  • The binaries are overwritten
  • Both installations will use port 3306.
  • In both installations, the same socket file (e.g. /var/run/mysql/mysql.sock) is used.

Interestingly, on Windows, multiple MySQL installations are by far easier:

  • Binaries are under Program Files\\MySQL\\MySQLX.X. With two installations, you specify different directories.
  • Data files are by default directly under the installations paths (MySQL 5.0) or under “Documents And Settings…” (MySQL 5.1) with no collisions.
  • The my.ini files are located directly under the installation paths.
  • The installer asks you for a service name, and notifies you if that name is already in use.
  • The installer let’s you know if port 3306 is already taken, and allows you to specify another one.
  • Of course, there’s no unix socket file.

I usually install MySQL on Linux using the binary tarball. When there’s only one instance expected, I go with the standards: my.cnf is in /etc, mysqld is under /etc/init.d, etc. (no pun intended)

Steps for multiple installation on Linux

When more than one installation is expected, here’s a safe way to ensure no collisions occur. We will assume a 5.0 and 5.1 installation (say we want to upgrade):

Install the MySQL binaries under /usr/local

Following the INSTALL document file, we make symbolic links to the full path in the names

ln -s /usr/local/your-mysql-5.0-full-installation-path /usr/local/mysql50
ln -s /usr/local/your-mysql-5.1-full-installation-path /usr/local/mysql51

Do not put my.cnf under /etc

Instead, put them directly in the installation path:

touch /usr/local/mysql50/my.cnf
touch /usr/local/mysql51/my.cnf

Setup different port numbers in the my.cnf files

For example, in /usr/local/mysql50/my.cnf, use port 3350:

[mysql]
port=3350

[mysqld]
port=3350

Choose another port (e.g. 3351) for the 5.1 installation, then have it written as above in the 5.1 my.cnf file.

Choose distinct socket files

For example, in /usr/local/mysql50/my.cnf, add:

[mysql]
port=3350
socket=/tmp/mysql50.sock

[mysqld]
port=3350
socket=/tmp/mysql50.sock

Choose another socket and set it up in the second my.cnf file. You may also choose to put the socket files under the data paths or installation paths.

Choose distinct data paths

Either do not specify them at all, in which case they will reside under the installation path, or, if you want to enjoy another partition, use:

[mysql]
port=3350
socket=/tmp/mysql50.sock

[mysqld]
port=3350
socket=/tmp/mysql50.sock
datadir=/my_raid_path/mysql50/

Create distinct daemons

Manually copy support_files/mysql.server to /etc/init.d under distinct names. For example:

cp /usr/local/mysql50/support_files/mysql.server /etc/init.d/mysqld50
cp /usr/local/mysql51/support_files/mysql.server /etc/init.d/mysqld51

Other settings

You may wish to set up a soft link for the client binaries, for example:

ln -s /usr/local/mysql50/bin/mysql /usr/bin/mysql50

chkconfig (RedHat and derived) can be used to start/stop daemon as service:

chkconfig --add mysqld50

Conclusion

I would prefer MySQL to come bundled in self-contained directory. The tarball is almost that, except it expects socket file to be on /tmp, and by default uses the 3306 port. I would further like to have a dpkg-reconfigure script to setup the above issues.

Till then, it’s manual configuration.

28 thoughts on “Manually installing multiple MySQL instances on Linux: HOWTO

  1. Iam doing the same thing in Windows successfully. But in linux, I face some difficulties. I follow your valuable suggestions, but Iam facing another problem:

    Starting MySQL……………………………………………………………………………………….. ERROR! The server quit without updating PID file (/var/lib/mysql/Test.pid).

    Why this happends???

  2. Windows and Linux make for two completely different installation process. You CAN’T be “doing the same thing”.

    I can’t presume to help you out by negotiating comments. Check out your MySQL error log is the one thing I can tell you.

    Otherwise, best place to get advice is stackoverflow.com, or otherwise get consulting.

  3. Hi
    I have this multiple instance on my machine with 3 different port.
    How do I reset root password on every port?
    Thanks

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.